Specialized truck
6×4 water tanker with a 20 m³ tank for site supply
This 6×4 water tanker has a 20,000 L tank and a water pump described in the source record. It is intended for supply locations accessible to a three-axle truck. Potable-water suitability requires confirmation of the final tank and pipework materials, cleaning procedure and sanitary documents for the destination market.
Product gallery
This 6×4 water tanker transports and distributes water for the buyer's specified use. Potable-water applications require confirmation of the complete fluid circuit and sanitary documentation. Loaded mass and axle limits must be checked before quotation.
Core capabilities
| Capability | Value | Conditions |
|---|---|---|
| Tank volume | 20,000 L | Source volume; permitted loaded mass depends on vehicle and axle limits. |
| Drive layout | 6×4 | Check site access and axle loading along the route. |
Suitable conditions
- Non-hazardous water transport on routes suited to a 6×4 vehicle
- Supply sites with a defined filling procedure
Conditions requiring another solution
- Potable-water supply without sanitary compliance documents for tank and pipework
- Sites incompatible with loaded mass or vehicle access
Configuration options
| Option | Selection note |
|---|---|
| Potable versus technical water | Document and validate the tank and full circuit for the intended use; stated material alone is insufficient. |
| Pump and connections | Specify flow, connections and discharge method before quotation. |
Frequently asked questions
What is the tank volume?
The source lists 20,000 L, or 20 m³. Permitted filling depends on final payload and axle-load limits.
Can it deliver drinking water?
The source markets potable-water use and lists 304 stainless steel, but sanitary documents and the complete fluid circuit must be validated for the destination market.
Is the pump specified?
A 304 stainless water pump is mentioned. Confirm flow rate, connections and final equipment before quotation.
Information needed for a quotation
Prepare these details so the final chassis, equipment and destination-market requirements can be checked before quotation.
Buyer inputs
- Destination country and port
- Potable or technical water use
- Required flow and connections
- Route and site access
- Required sanitary documents
Checks before quotation
- Confirm tank and pipework material
- Check permissible load with 20,000 L of water
- Validate pump, connections and cleaning
- Obtain sanitary documents if potable use is intended
- Confirm local registration and compliance